The two wall panels screw into studs on both walls, and every shelf is screwed through both panels.

What if a shelf spans too far?

Press Add support. Yard adds a nosing under the front edge and a cleat on each wall.

Can I change the size?

Yes. Press Make it your size, type your own width, height and depth, and Yard redraws the model, cut list, Buy list and steps to match.

A circular saw or table saw, a drill/driver, a tape measure, a square and clamps. The steps name anything extra.

Free plan

60″ W × 84″ H × 48″ D · 11 cut pieces · Buy list ~$301

Two wall panels meet in an L and carry triangle shelves that use the dead corner.

Measured from a real 3D model, not a picture. Every cut checked.

How is it held up?: The two wall panels screw into studs on both walls, and every shelf is screwed through both panels.
What if a shelf spans too far?: Press Add support. Yard adds a nosing under the front edge and a cleat on each wall.
Can I change the size?: Yes. Press Make it your size, type your own width, height and depth, and Yard redraws the model, cut list, Buy list and steps to match.
What tools do I need?: A circular saw or table saw, a drill/driver, a tape measure, a square and clamps. The steps name anything extra.